The characteristic of this high-current contact is its high current density, allowing the transmission of large currents within a limited conductor space. By adopting a two-piece structure, not only is the current density increased, but the contact pressure is also kept low. It is possible to design very small large-current and high-current connectors that require a large contact area.
| Material / Treatment | Supporting Tape |
|---|---|
| BeCu Special Quenching Process | |
| Louvers: Cu with various treatments (standard is Ag plating) | |
| Surface Treatment | Changeable to Pt, Au, Rh plating, etc. |
| Thickness | 0.20mm (Supporting Tape) |
| Operating Temperature | -270℃～180℃ |
| Contact Resistance | 300μΩ / Louver |
| Continuous Rated Current | 60A / Louver max |
| Permissible Short Circuit Current | 1500A / 1sec / Louvers – 1000A 3 sec / Louver |
| Surge Current | 3500A / Louver |
| Thickness | Contact Force | Sliding Force | Usable Range of Motion | Maximum Movement Range | |
|---|---|---|---|---|---|
| mm | N | N (μ＝0.35) | hu max(mm) | hu min(mm) | mm |
| 0.20 | 8 | 2.8 | 1.45 | 1.05 | 0.4 |
